This specification is based on the requirements of the Ministry of Housing and Urban-Rural Development, “Notice on Printing and Issuing the “2009 Project Construction Standards and Regulations Formulation and Revision Plan” (Jianbiao  No. 88), and the Shenyang Fire Research Institute of the Ministry of Public Security, in conjunction with relevant units. Formulated.
In the process of norm-setting, the preparation team followed the relevant national laws, regulations and technical standards, conducted extensive and in-depth investigation and research, and earnestly summarized the practical experience of fire prevention in the electrical field of civil buildings in China, soliciting design, supervision, construction, and product manufacturing. The opinions of the relevant units, such as the fire control, refer to the relevant standards and specifications at home and abroad, and are finalized after review by experts.
The provisions of this specification marked in bold type are mandatory and must be strictly enforced.
This Code is managed by the Ministry of Housing and Urban-Rural Development and explains the compulsory provisions. The Fire Department of the Ministry of Public Security is responsible for the daily management work. The Shenyang Fire Research Institute of the Ministry of Public Security is responsible for the interpretation of specific technical contents. In the implementation of this code, it is hoped that all units will carefully summarize the experience in conjunction with engineering practice, pay attention to the accumulation of information, and feedback relevant opinions and suggestions to the Shenyang Fire Research Institute of the Ministry of Public Security at any time (Address: 218-20, Wenda Road, Huanggu District, Shenyang, Liaoning Province) No. A, postcode 110034), for future reference.
The main editor of this specification: Shenyang Fire Research Institute of the Ministry of Public Security
Participating unit: Liaoning Provincial Public Security Fire Brigade
Shandong Provincial Public Security Fire Brigade
Shanxi Provincial Public Security Fire Brigade
China Architecture Northeast Design and Research Institute Co., Ltd.
Shanghai Architectural Design Research Institute Co., Ltd.
China Architecture Southwest Design & Research Institute Co., Ltd.
China Architecture Northwest Design and Research Institute
Shenzhen Architectural Design Research Institute Co., Ltd.
Institute of Building Fire Protection, China Academy of Building Research
China Architecture Design Institute Co., Ltd.
Shanghai Electric Apparatus Research Institute
Jiusheng Electric Co., Ltd.
Shanghai Gaoqiao Cable Group
Shenyang Swo Electric Co., Ltd.
Schneider Electric (China) Investment Co., Ltd.
1 General 4
2 terms 5
3 Basic requirements 6
4th common electricity 7
4.1 General provisions 7
4.2 Distribution Substation 7
4.3 High-voltage power distribution units and transformers 7
4.4 Daily Electric Load Distribution 8
5 Fire power 9
5.1 General provisions 9
5.2 Fire negative charge level and power supply requirements 9
5.3 Fire load distribution 10
6 Cable selection and laying 12
6.1 General provisions 12
6.2 Selection of power distribution and control cables for fire-fighting equipment 12
6.3 Selection of power distribution and control cables for non-fire-fighting equipment 13
6.4 Laying of power cables 13
6.5 Selection and laying of electronic information system cables 14
6.6 Cable fire blocking 14
7 Electrical equipment and protection 16
7.1 Fire-fighting equipment 16
7.2 Elevator 17
7.3 Luminaires 17
7.4 Other electrical equipment 17
7.5 Power Protection 18
Appendix A Fire Resistance Requirements for Wire and Cable 18
Appendix B Horizontal Burning Performance and Test Requirements for Wire and Cable 19
1.0.1 This specification is developed to prevent and reduce electrical fire hazards and to protect personal and property safety.